Sodium Hypochlorite 15% Solution for Contamination Control

An extremely high‑strength, industrial-grade bleach for deep‑cleaning tubs, shelving, SABS, humidifiers and any hard surface you need clean. If you are dealing with a contamination outbreak like trichoderma, this hypo is powerful enough to destroy those pesky mould spores. Do not handle this product with anything but complete respect, it is 5-6 times the strength of consumer grade bleach.

Thin liquid (not thick, like typical bleach), supplied in a UN‑approved safety HDPE bottle.

Why Use 15 % Sodium Hypochlorite?

• Broad‑spectrum disinfectant—destroys mould spores, bacteria and viruses in seconds.
• Cost‑effective: dilute on site to the exact strength you need or use as full strength.
• Leaves no aromatic residue when rinsed; breaks down to salt and water.

Common Dilution Guide

*Ratios based on 15 % stock solution. Always add bleach to water, not vice‑versa, and prepare fresh daily for best efficacy.

How to Use

1. Wear nitrile gloves, eye protection and a respirator if misting.
2. Measure the required bleach and water into a HDPE or glass container.
3. Apply with a sprayer or cloth, ensuring full wet contact for at least 60 seconds.
4. Rinse food‑contact surfaces with clean water after disinfection.

Pack Size

1 Litre, 15 % active sodium hypochlorite in a UN‑certified, light‑blocking HDPE bottle with child‑resistant cap.

Storage & Handling

• Store upright, sealed and below 25 °C, away from acids, ammonia and metals.
• Vent the cap monthly to release built‑up oxygen.

Legal & Safety

Oxidising, corrosive liquid—keep out of reach of children and pets. Do not mix with acids or peroxides or any chemicals other than water; toxic chlorine gas may evolve. Intended solely for sanitising equipment used in the cultivation of legal mushroom species.